Linksys WRT54G Static Routing Ping

November 3, 2005 at 08:49:46
Specs: XP Pro, 512

Here is my situation...

I bought a WRT54G v5.0. It is set up as follows:

INTERNET IP: 192.168.1.33
INTERNAL IP: 192.168.10.1
Gateway: 192.168.1.9
DHCP: Enabled

This router is hooked up internally to our network. I added a Static Route on our Internet Router (192.168.1.9) for the router as follows:

192.168.10.0 255.255.255.0 192.168.1.33

In other words, all traffic directed at the 192.168.10.0 network should be sent to 192.168.1.33 for routing.

From the WAN (192.168.1.0) network I can ping 192.168.1.33 AND 192.168.10.1

In other words, I can ping both the internet IP and LAN IP of the Router.

I cannot, however, ping any clients (ex.. 192.168.10.102) on the LAN of the router.

On the ‘Advanced Routing’ page of the web setup, I have set the ‘Operating Mode’ to Router.

The Routing Table looks like this:
Destination LAN IP Subnet Mask Gateway Interface
0.0.0.0 0.0.0.0 192.168.1.9 WAN (Internet)
192.168.1.0 255.255.255.0 192.168.1.33 WAN (Internet)
192.168.10.0 255.255.255.0 192.168.10.1 LAN & Wireless

Could you please help me get this configured so I can talk directly from the WAN to clients on the LAN. I want to be able to Ping any computer on the 192.168.10.0 network from the 192.168.1.0 network.

Thanks in advance...


See More: Linksys WRT54G Static Routing Ping

Report •


#1
December 28, 2005 at 08:45:31

have you found a solution yet? I'm trying exactly the same thing.
Please reply via email if you have any leads.
Thanks!

Report •
Related Solutions


Ask Question