Linksys router-can't connect to

January 26, 2011 at 05:52:25
Specs: Macintosh
I'm trying to access to configure my linksys router to add new hardware to my home network but my browser (Safari) can not open the page - error message suggests 'server where this page is located isn't responding.' Please help?!

See More: Linksys router-cant connect to

Report •

January 26, 2011 at 07:08:32

I though LinkSys was on In any case it could have been changed. The best solution is to look at your Net Work Card settings to see what the Default Gateway is. That will be the address of your router. Put that address in your browser to get to it. I think on MAC OS 10 you can run the IFCONFIG command from the terminal.

Report •

January 26, 2011 at 08:09:06
Typically ifconfig doesn't show the default gateway address. At least, not on my OpenBSD boxes or any of the linux boxes I've played with.

curtr@cs5:/usr/home/curtr> ifconfig em0
lladdr 00:11:2f:74:7b:61
priority: 0
groups: egress
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet netmask 0xffffff00 broadcast
inet6 fe80::211:2fff:fe74:7b61%em0 prefixlen 64 scopeid 0x1

If you have a Mac, look for the Network Settings in the GUI and check in there to find out your DG. If you know your way around BSD (OS X is BSD based after all), you could check in the /etc folder and see if there's a mygate file. If there is, that will contain the DG address as well.

curtr@cs5:/usr/home/curtr> cat /etc/mygate

It matters not how straight the gate,
How charged with punishments the scroll,
I am the master of my fate;
I am the captain of my soul.

***William Henley***

Report •

April 13, 2011 at 00:14:06

Report •

Related Solutions

Ask Question