Lan connect.can receive but not transmit

January 10, 2011 at 12:30:49
Specs: Windows Vista
I've got an ASUS G50V that I normally connect to the net through a wireless router but I recently bought a router so I can make a physical connection and increase speed. However I cant get it to connect to the router no matter what I do (i had it working for a few hours at one point but it dropped off again).

I confirmed it wasnt the router but running a crossover cable from the laptop to my desktop, setting static ips on both. Now I can ping the laptop from my desktop but for some reason I cannot ping the desktop from the lappy. I've tried everything I can think of but no dice. Any suggestions?

See More: Lan connect.can receive but not transmit

Report •

January 10, 2011 at 12:41:06
When you went to plug your G50v in to the router, did you bother to shut the wireless off? If you haven't, do so. Go into the Network Interface properties and disable the wireless NIC. Also, check to ensure your wired NIC is set to get it's TCP/IP settings automatically (DHCP) and then I bet it'll work just fine.

It matters not how straight the gate,
How charged with punishments the scroll,
I am the master of my fate;
I am the captain of my soul.

***William Henley***

Report •

January 10, 2011 at 14:43:19
Tried that a couple times, still nothing. It shows as connected but gives me an unidentified network and only local access, and even then I cant even ping the router

Report •

January 10, 2011 at 15:40:30
Ping your loop back on your laptop.


Tell us what you get. Sounds like a TCP/IP stack issue. May need to remove and reinstall the driver for your NIC.

Report •

Related Solutions

January 10, 2011 at 21:39:14 pings just fine

Report •

Ask Question