Articles

IP segments - 192.168.1, 192.168.2

January 13, 2005 at 12:26:19
Specs: Windows 2000, 2500 Athlon/1GB Samsung D

Hi all. Probably a simple answer to this simple question, but if I were to run 2 IP ranges on one network i.e. 192.168.1.* and 192.168.2.*, how would I get the two different segments to communicate with each other. For example the router is 192.168.1.1, would a system on 192.168.2.24 be able to see the outside world?
Thanks in advance.

See More: IP segments - 192.168.1, 192.168.2

Report •


#1
January 13, 2005 at 14:20:11

For each segment on a network, you need to have a router. So if you had an internet connection, and two internal network connections, then you'd need to have a router that supported that. Most cheap Cable/DSL routers don't support multiple subnet routing like that. That's more of a business class router.



Report •

#2
January 13, 2005 at 14:25:34

A good clear answer. Thanks for the quick response and helpful advice.

Report •

#3
January 13, 2005 at 14:30:50

at my place, I was running an ICS network using phoneline adapter cards. 2 laptops were added to the system and were networked together, one using ICS to act as router for the other not attached to the home network. I did not set up this network so don't know what IP addresses were used but something other than 192.168.0.x must have been used. all computers were able to access the internet with this arrangement.

now I have replaced all of this with a wireless router and all computers connect to the internet through the router so the secondary network is not used anymore.

so to answer your question, yes, two ip ranges can be used and all pcs in both ranges should be able to access the internet.

Al


Report •

Related Solutions


Ask Question