Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
How-to:2 LAN cards, assign ftp to 1
Name: Anan Purson Date: October 3, 2008 at 09:34:09 Pacific OS: Windows Server 2003 CPU/Ram: 1GB Product: Dell
Comment:
I want to attach a 2nd DSL line to the server but only use it for ftp. How do I set it up so that this second line (on a 2nd ethernet card) is only used for ftp traffic?
Name: Anan Purson Date: October 3, 2008 at 09:38:36 Pacific
Reply:
It is easy to understand how to set up incoming port 21 traffic to a particular ip (in the router port forwarding) but I don't get how to route outgoing port 21 traffic through a particular ip.
0
Response Number 2
Name: JackR Date: October 3, 2008 at 11:25:37 Pacific
Reply:
it's really easy, on one of your nic's just block both ftp inbound and outbound traffic.. you can do this with XP firewall...
One note: I take it you have load balancing working? if this is a XP machine or better, it's enabled.. the metric on the network adapters must be the same..
0
Response Number 3
Name: Anan Purson Date: October 3, 2008 at 11:46:12 Pacific
Summary: I have one Athlon 1.8XP Server with 2 lan cards 1. Realtek is connected to the DSL/ROUTER 2. SureCom is connected to the HUB no.1 slot since my 16port hub has no uplink. While my 8 units are all conne...
Summary: Hello, I am running Windows 2000 SP3 on my P4 machine. I have 2 LAN cards, D-link and Realtek. I also have 2 Wireless internet modules. When I connect one to one LAN card, my PC autoconfigures itself ...
Summary: Can Any one help me? I have 9 computers which are connected through switch and ADSL router/modem which is also connected to the switch. All the computers were accessible from each other and were able ...
0 
