Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
how to enable dhcp in moderm
Name: yee Date: April 6, 2004 at 12:43:28 Pacific OS: WindowsXP CPU/Ram: 900/512
Comment:
my adsl moderm, Artech DSL305E. i used 10.0.0.2 connect to moderm setting. but after i disable dhcp function in moderm, and save the setting, i found can't connect to moderm setting through 10.0.0.2. how i enable back dhcp or connect to moderm setting??
Name: mbrook Date: April 7, 2004 at 06:31:13 Pacific
Reply:
There are a couple of things you can do here. There should be a reset button on your modem that will take you back to when you first took it out of the box and start over or you could go to a command prompt and type in;
route print
press enter. The Default Gateway will be your IP address of your modem and then you can use that IP address to log back into the modem and change the settings.
0
Response Number 2
Name: wanderer Date: April 7, 2004 at 11:52:42 Pacific
Reply:
if he is configured for dhcp and he turned off dhcp he will get no ip from the router. XP will default to the iana supplied ip address with no gateway.
I am surprised your ISP allows access to the modem. Are you sure we aren't talking a router here????
Reset is a good start. If modem you will most likely have to contact the isp for help.
Summary: Hello, I have one question to ask. i would like to know how to enable ping as I cant get ping in the game I play (ex. Raven Shield) with always 1000. I cant even ping some other sites as well l...
Summary: i have link up 2 pc sharing internet via cable modem and a D-link 524 router. this is the first time i tried networking. the problem is, when ever i power off the pc, cable modem and router, i'll have...
0 
