I have a three computer network. All three are Windows XP. The Server has two network card, one for the internet and the second for us to connect remotely. First Network Card : CreditLan IP address : 10.0.0.100 SubNet : 255.255.255.0 Default : 10.0.0.250 DNS : 10.0.0.250 Second Network Card : RemoteLan IP Address : 10.0.0.150 SubNet : 255.255.255.0 Default : 10.0.0.254 Two Routers Cisco : IP Address : 10.0.0.254 For Us to Connect Remotely NetGear : IP Address : 10.0.0.250 For Internet If I disable the CreditLan then I can connect Remotely to the server but the Internet for the server dose not work. If I disable the RemoteLan then the inter for that computer works but I can’t connect remotely Our Network is : 192.168.0 SubNet : 255.255.255.0 I think I need to route all address In the CreditLan with 192.168.0 to The RemoteLan Or disable RemoteLan and have the NetGear Router Route all IP Address with 192.168.0 to the Cisco Router Or something like this. Or I might be going in the wrong direction ! Hope this all make senses. Any help would be appreciated. Thanks!

you have some issues here. 1. routing table: you may need to modify routing table by using route command. or modify it on the routers. 2. you should setup two different ip ranges for the internet and lan. For more tips or information, go to http://www.ChicagoTech.net Robert, MS-MVP/MCSE and CNE Networking, Internet, routing & VPN Support, Tips and FAQs on http://www.ChicagoTech.net

Would this work if I was to disable RemoteLan Make Credit Lan Default GateWay 10.0.0.250 and add this following line in dos ROUTE ADD -P 192.168.0.0 MASK 255.255.0.0 10.0.0.254 METRIC 2