I just ordered a Cisco 2501 router off ebay with version 11.2 IOS. The previous owner failed to erase the NVRAM, and there is a password set. I tried to go into ROMMON to change the Config Register, but it comes up with this screen when I break: Abort at 0x10E1DB2 (PC) Then I try to see what commands I can choose and it brings up this: >? $ Toggle cache state B [filename] [TFTP Server IP address | TFTP Server Name] Load and execute system image from ROM or from TFTP server C [address] Continue execution [optional address] D /S M L V Deposit value V of size S into location L with modifier M E /S M L Examine location L with size S with modifier M G [address] Begin execution H Help for commands I Initialize K Stack trace L [filename] [TFTP Server IP address | TFTP Server Name] Load system image from ROM or from TFTP server, but do not begin execution O Show configuration register option settings P Set the break point S Single step next instruction T function Test device (? for help) Any help would be greatly appreciated. I am lost