connect two computers under two routers

January 15, 2011 at 13:06:52
Specs: Windows 7
The main internet line goes into a router, from that router, two more routers are connected through output lan cable, the 2nd and the 3rd router gets ip-s 192.168.22.30 and 192.168.22.40. From both of the routers many computers are connected, each router gives ip to pc-s from 192.168.0.2 to 192.168.0.254. Now my problem is, how i can connect a pc which is connected to router 2 having ip address 192.168.0.6 with another pc which is connected to router 3 having ip address 192.168.0.4?

See More: connect two computers under two routers

Report •


#1
January 15, 2011 at 15:45:37
What's with all the routers? One router can cover 254 devices. I don't understand why people make things so hard.

How do you know when a politician is lying? His mouth is moving.


Report •

#2
January 15, 2011 at 23:13:14
my area of coverage is very large, so one router cannot cover the whole area by wifi.

Report •

#3
January 16, 2011 at 10:57:21
How large is large? Is it between buildings? What about running a cat5 cable?

How do you know when a politician is lying? His mouth is moving.


Report •

Related Solutions

#4
January 16, 2011 at 12:16:53
basically the building is very large, and the main modem is situated at the centre, from that two routers are connected for east side and west side via lan cable.

Report •

#5
January 16, 2011 at 16:55:55
Sometimes it's easier to run a cat5 cable through the ceiling or along the baseboard, to a switch on either side.

How do you know when a politician is lying? His mouth is moving.


Report •

#6
January 18, 2011 at 09:02:15
but the situation is more difficult than this, it is a 4-flored large building and there are 7-8 routers, i had given an easier example. THE SITUATION CANNOT BE ALTERED AND NO HARDWARE CAN BE INSTALLED, can you tell me that how in this setup two computers under different routers connect (play multiplayer games, trasfer files) each other?

Report •

#7
January 18, 2011 at 10:31:17
You don't put in routers to increase wifi range at least not as routers.

If nothing can be changed then there is no solution. You can't make up for bad planning to start with.

Answers are only as good as the information you provide.
How to properly post a question:
Sorry no tech support via PM's


Report •

#8
January 18, 2011 at 13:48:44
how i can connect a pc which is connected to router 2 having ip address 192.168.0.6 with another pc which is connected to router 3 having ip address 192.168.0.4?

How do you wish to connect?

If you mean using Remote Desktop then RD has to be enabled on the "target" computer (ie: the one you'll be connecting to) and then you simply run RDC on the other computer, type in the IP of the target and click OK. You will have to supply login credentials.

If you mean connect to a shared folder, then you must first create a share and then create a user account on the target PC for the one connecting to the share. Use the exact same username/password that you login in on the connecting PC at bootup. Add that user account to the share and grant appropriate permissions. Once the shares done, on the connecting computer open Windows Explorer or My Computer and go to "Tools >> Map Network Drive" and map a drive to the share.

It matters not how straight the gate,
How charged with punishments the scroll,
I am the master of my fate;
I am the captain of my soul.

***William Henley***


Report •

#9
January 19, 2011 at 09:43:10
it is solved by port forwarding in the router, thank you all, my problem is solved

Report •

#10
February 19, 2011 at 23:34:49
Can you explain further

Report •


Ask Question