hello, can i get the configuration to link 2 pc's thought cross cables? thanks

Someone just asked that in the last day or two. Look through the recent entries because someone replied with exactly how to crimp the crossover cable. <><><>Tope<><><>

the pin out for a cross connect is as follows 1-green/white 2-green 3-orange/white 4-blue 5-blue/white 6-orange 7-brown 8-brown/white now you cross pins 1,3 and 2,6: 1-orange/white 2-orange 3-green/white 4-blue 5-blue/white 6-green 7-brown 8-brown/white You only need two pair for a crossconnect (pins 1,2,3,6) it doesnt really matter how you terminate the other pins.

Hi wirelessguru, I am connecting 2 PC using cross cable. Both PCs runing Window 2000 and there is only 1 IP address to LAN. I have installed 2 Network cards in one PC (#1) and one network card in the other one (#2). In the PC1 I configured one network card with original IP to LAN, and other network card with IP:192.168.0.1; In the PC2 I configured Network card with IP:192.168.0.2 Both connections are seen in the desktops of both PC but I still can't access to internet from PC2.I have been trying many times but I could not success. If you do know how to solve this, please help! Thanks a lot Regards, /Misa misadmitri