Security & Virus | Hardware | Windows XP | Windows Vista | PC Gaming

Cisco Routing Tables

Name: Jason
Date: November 7, 2002 at 05:37:58 Pacific
OS: N/A
CPU/Ram: N/A

Comment:

I am trying to add a static route to the routing table of a cisco 771m isdn router. The command i am using is: set ip route de 172.31.31.0/24 ga 150.150.18.206 I keep getting the following error: Value outside of acceptable range, adjusted ROUTE Any ideas would be much appreciated.

Reply:

I haven't used one of those guys in a loooong tome (with a good cause) but do you have a valid route to 150.150.18.206 in your routing table on the router in question? The syntax certainly looks right. I know you can specify the RIP propogation and metric too as part of the command. I believe they are optional but have you tried re-entering the command specifying these two values? Hope this helps

0

Networking problem

ADSL Integration?

Post Locked

This post is quite old and has been locked from receiving new replies. Please create a new posting instead.

Summary: Ip : 192.168.0.0 - 192.168.0.127 subnet mask = 255.255.255.128 network bit = 25 how to add this to routing table?...

Summary: this is one for the cisco gurus out there.. Lets say I have a 172.16.0.0 network Lets say theres twenty sites, all configured using EIGRP. Then I want to add an extra site that will use a different ne...

Summary: Hi, I need to add a value to my routing table: Network Destination: 192.168.1.1 Netmask 255.255.255.0 Gateway 192.168.0.1 I've been trying to use "route add" in a command window but it tells me that t...