Hola, Im studying for CCNA and im practicing some routing configs. Im just a little confused bout this RIP config for the router. So according to my notes, after you enable RIP you then specify network address that are directly connected to your router. Ok here is a simple example: .... assume rip has already been enabled Router 1 ------- e0 = 192.168.10.1 e2 = 192.168.20.1 s0 = 10.0.0.1 rip entries: network 192.168.10.0 network 192.168.20.0 network 10.0.0.0 Router 2 ------- e0 = 192.168.30.1 e1 = 192.168.40.1 s0 = 10.0.0.2 s1 = 20.0.0.1 rip entries: network 192.168.30.0 network 192.168.40.0 network 10.0.0.0 network 20.0.0.0 Router 3 ------- e0 = 192.168.50.1 e1 = 192.168.60.1 s0 = 20.0.0.2 Rip entires: network 192.168.50.0 network 192.168.60.0 network 20.0.0.0 is this config right? Im just a bit confused as to what network entries are to be made anyways, please clarify things thanks a bunch