Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Cisco PIX 501 Default settings
Name: Fallen Angel Date: June 15, 2002 at 11:59:06 Pacific
Comment:
Hi All
I was wondering if anybody knew how to restore the default settings on a PIX 501 firewall? i have already entered the default settings from one of the supplied manuals but still no net access, just blocks everything.
Name: Soul of Sin Date: June 15, 2002 at 21:17:00 Pacific
Reply:
I usually work with the 506s and above. Hopefully the same premise should work with the 501 (famous last words).
You could do a simple write erase. That will blow away the current config in flash memory. You can do a write terminal to verify.
Now you do know that by default all interfaces are disabled? You have to enable them before they will work. Reading how you say everything is being blocked I have the sneaky suspicion you may not have enabled the interfaces or an interface. But it's just a guess.
Summary: Need help with my network set up. I have a Cisco PIX 501 connected to my Cable router and a Linksys wireless router WRT54G connected to my Cisco PIX 501. I have a server connected to the PIX and my wo...
Summary: I have the pix (501 v6.2(2) PDM 2.1 (1)) setup and running as a DHCP server, and is configured – I used Terminal emulation to reset to default before proceeding, then set options, then enabled Telne...
Summary: This is the existing setup I have walked into, I did not set it up but need to fix it. Ok here we go, first their is a cisco pix 501 that handles the vpn, its' inside address is 192.168.2.1 and it's c...
0 
