Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Cisco NTP
Name: buckethead (by coleg) Date: November 14, 2007 at 09:12:06 Pacific OS: Windows XP Pro CPU/Ram: 1 GB Product: Catalyst 6509
Comment:
Anyone know the command to force an ntp update on a Catalyst 6509? I have it pointed to the NTP server but it's not synced. Thanks
The significant problems we have cannot be solved at the same level of thinking with which we created them.
Name: Curt R Date: November 14, 2007 at 12:21:09 Pacific
Reply:
As far as I know, there's no specific command to force an update. But, I certainly don't know everything so don't take that as gospel.
We just configure ours to point at our time server and that's that. If there is a command, I imagine you'll find it in the IOS.
What's making you think it's not updating?
0
Response Number 2
Name: buckethead (by coleg) Date: November 14, 2007 at 12:37:12 Pacific
Reply:
I set the ntp server, but when i do show ntp association it doesn't have a reference clock like our other 6509 does and when i do a show ntp status it says not synchronized. I don't know if maybe the ntp service failed or what. Thanks for the response.
The significant problems we have cannot be solved at the same level of thinking with which we created them.
0
Response Number 3
Name: jefro Date: November 14, 2007 at 16:37:52 Pacific
Reply:
Set the time first to within 5 minutes of actual.
I read it wrong and answer it wrong too. So get off my case you peanut.
0
Response Number 4
Name: vipergg Date: November 14, 2007 at 19:30:40 Pacific
Reply:
You could just sync it off the other 6509 , it doesn't have to go all the way to the ntp server , just add " ntp server <working 6509 address> " .
Summary: Dear all, i have a requirement of pulling Cisco router/switch startup config to a tftp server, most of my IOS are below version 12.2 so I cannot try the kron job.so I will need a tool that can log in...
Summary: I use a work computer from home, it connects to email through a Cisco VPN client, and I am consistently getting error message 412: the remote peer is no longer responding. The IT department have teste...
Summary: Have a Cisco 1720. To use the dial in remote access do I need a modem or can I simply connect in a standard phone line with dial tone directly into the Aux port of the router? ...
0 
