Security & Virus | Hardware | Windows XP | Windows Vista | PC Gaming

Cisco 3560

Comment:

I am trying to enable port scaning on a cisco 3560. When I do it shuts the interface down. I am running an IDS on the destination port and need to access it remotely.

Name: jefro
Date: February 13, 2006 at 19:37:14 Pacific

Reply:

There might try no shut before you do a copy run start. Seems that model does that in other companies.

0

Reply:

no shut does not fix the problem. I tried using the following setup: monitor session 1 source vlan 1 monitor session 1 destation int fa 0/23 ingress vlan 1

0

Name: jefro
Date: February 14, 2006 at 20:49:55 Pacific

Reply:

Oh, I re-read that. Is storm settings causing that? Check port storm.

0

Network and Gaming

Port Forwarding On A Neto...

Post Locked

This post is quite old and has been locked from receiving new replies. Please create a new posting instead.

Summary: You won't get line speed out of an inexpensive router between networks. Especially if you decide to put some kind filtering (when you catch your first virus from them or vica versa). Price a Cisco...

Summary: Okay, put them on seperate networks, using a Switch: What your doing here is using VLAN's one for each Workgroup, this is called segmentation. workgroup1 on example 192.168.1.x/255.255.255.0 - layer 2...

Summary: Dear all, i have a requirement of pulling Cisco router/switch startup config to a tftp server, most of my IOS are below version 12.2 so I cannot try the kron job.so I will need a tool that can log in...