Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Cisco 1601 router
Name: pointer434 Date: September 2, 2003 at 11:20:50 Pacific OS: 11.1.? CPU/Ram: ?
Comment:
During an ill fated password recovery on a Cisco 1601 Router I put in a wrong statement for a register setting. I assume that this is my problem but as of now, the router will not reboot and all I see is a blank screen in HyperTerminal.
The recovery instructions call for putting in the "confreg 0x2142" at the rommon prompt. Instead, I put in "confreg 0x3142" and she froze at that point. Rebooting the router has no effect; all I can see through HyperTerminal is a blank screen with a blinking cursor. It is totally unresponsive to any typing on my part. No boot sequence at all...
Name: Mendez Date: September 2, 2003 at 15:14:16 Pacific
Reply:
I believe you have changed the register settings for the console baud rate 9600 Lower your baud rate when you are connecting from hyperterminal. Default speed is 9600.
Summary: Hi All, Just wondering if it is possible to bridge two networks using a Cisco 1601 router. I guess that the answer is no as there is only one ethernet device but wondering if you could configure the ...
Summary: We have 60 cisco 1601 routers in our bank.We want to add another ethernet port for our VSAT terminals.Is it possible to install any card in the WAN slot that would do these ? Kindest regards ...
Summary: I have a Polycomm router hosting a T1 connection now and I'm trying to connect a Cisco 1601 in place of the Ploycomm with very little success. The Polycomm doesn't really route, I think it acts as mo...
0 
