Cascade a befsr41 behind an e2000

March 24, 2011 at 11:41:43
Specs: Windows XP
HOW DO I SETUP A CISCO BEFSR WIRED ROUTER BEHIND A WIRELESS CISCO E2000

See More: Cascade a befsr41 behind an e2000

Report •


#1
March 25, 2011 at 05:38:38
First, you hit your 'caps lock' key and stop yelling (all caps is considered yelling, and, it's a lot harder to read).

Second, you're asking about daisychaining two switches. Cascade is something entirely different and low end equipment isn't capable of it.

To internconnect (daisychain) two switches, you connect them with a crossover cable. With most modern switches you can use any port as an uplink port. If either of your switches is older, check the switch and it's manual to see if it has a specific uplink port. If it does, use that.

I suggest you click on my name above in my response and read my "how-go" guide titled, "‚ó¶Add a second Router to your LAN" In your setup you'd want to use the "LAN port to LAN port" scenario since you're going to want this all to be one subnet.

It matters not how straight the gate,
How charged with punishments the scroll,
I am the master of my fate;
I am the captain of my soul.

***William Henley***


Report •
Related Solutions


Ask Question