Computing.Net > Forums > Networking > ~500k transfer = network dies

Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.

~500k transfer = network dies

Reply to Message Icon

Name: Yiphic
Date: July 6, 2001 at 21:40:43 Pacific
Comment:

I'm a total networking newbie, and all I've done so far I have learned on the fly pretty much. Anyway, I have my first home network going, between a WindowsME machine and a Win98 machine, networked using AMD brand PNA
phoneline-networking cards, with TCP/IP. It would appear I did it successfully, as file and print sharing seems to work, but here's the deal:
I can trasnfer small files all the live long day, such as small jpgs and text documents, but as soon as I try to transfer something around 500k or larger, the transfer starts and a few seconds later fails, and reports that the network resource is no longer available, and all network communications
are impossible afterwards. The other PC still appears in the Network Neighborhood but is totally inaccessable. Trying to ping each other also becomes impossible. The only way to get the network back up seems to be to reboot, sometimes both machines. But then I'm back where I started, unable to transfer anything other than tiny files. It seems to not only be large files, but any large amount of data at once...like games or using PCAnywhere between the PC's.

This sounds to me like it could stem from a vast array of problems, but I'd still like any input anyone has to offer.

Basically, here's all I did to get this going:
-Installed both NICs and drivers
-Gave one PC an IP of 192.168.0.1 and .2 to the other
-Used the 'Home Networking Wizard' found under 'My network Places' on WinME and had it create a 'Home Networking Setup' floppy disk, which it said could be used in win9x machines.
-Used the floppy on the 98 machine
-Shared some folders on each machine

That's it. And it worked, or so it seems. Anyone have any ideas what could
be causing this problem, or how to troubleshoot it? I'd really aprpeciate
it.




Sponsored Link
Ads by Google

Response Number 1
Name: Chase
Date: July 7, 2001 at 07:27:46 Pacific
Reply:

I would guess that the problem lies in your phone wiring somewhere.

As a test, just get a single long phone cord, and connect the two systems directly.

If that works, then the lines are the problem. If it doesn't, give the AMD guys a shout. All of their contact information is at this site:

http://www.amd.com/support/techsup.html

HTH,
Chase


0

Response Number 2
Name: Yiphic
Date: July 7, 2001 at 20:34:27 Pacific
Reply:

Thanks for the tip. It just so happens I have a 50-foot phone cord which just barely reaches from one pc to the other. This certainly revealed the heart of the problem. I was then able to transfer very large files to and from, using both machines, with the network withstanding just fine.

Wonder what it is about my phone line that is bad. Maybe inaudible line noise or something. At least I now know the cards are okay, and that I did the software stuff right. That makes me feel a little better. Thanks a lot for your help.

I cant leave this long cord running through the house, so I guess it's back to the drawing board.


0

Sponsored Link
Ads by Google
Reply to Message Icon

Related Posts

See More


Peer Networking Problem VOIP in CISCO!!Help!!!



Post Locked

This post is quite old and has been locked from receiving new replies. Please create a new posting instead.


Go to Networking Forum Home


Sponsored links

Ads by Google


Results for: ~500k transfer = network dies

Network dies - XP Pro www.computing.net/answers/networking/network-dies-xp-pro/18347.html

Wireless side of network dies www.computing.net/answers/networking/wireless-side-of-network-dies/21280.html

network dies when on hub but not switch www.computing.net/answers/networking/network-dies-when-on-hub-but-not-switch/8153.html