Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
2nd NIC killed network
Name: Gordo Date: April 9, 2002 at 21:55:49 Pacific
Comment:
HELP! I set up a small 2 computer network with an ethernet crossover cable and it worked great. Then I installed a second NIC on one computer for DSL. Now DSL works on that computer but the network is not working. The workgroup and each computer are seen on each respective computer but you cant see the other computer on both. I think (dangerous) by reading that the IP address's of the TCP/IP are the culprit. Should I just assign the LAN NIC's a 192.0.0.1 and 192.0.0.2 address and leave the one DSL NIC alone? Is this the problem? Thought and advice are needed.
Summary: ok sounds easy but what about IP adresses. is it possible to use 10.0.0.1 without knowlegde of destination network topology (I mean it could be a used address at customer site) or are the addresses of...
Summary: That is not the proper setup. You connect your router to the comcast modem. Clone your pcs mac address to the wan interface of the router and you are done. This is all in the routers manual. Your ...
Summary: I am trying to setup a Windows 2003 box with a backchannel NIC for internet. I have a second NIC on this box on a private network that I would like to enable DHCP on. I have the service installed, b...
Router Vs. Win2k server w...
