Hey all, I'm upgrading a Novell 4.0 server to 4.1 and I'm having trouble getting the NIC drivers to load and work. The server had a 3Com Etherlink II card in it and I'm trying to install a Netgear card (downloaded the new driver), but after all the driver-loading finishes I get the following errors: Server-4.10-1586: Loader cannot find public symbol: MSMRdConfigSpace32 Server-4.10-1586: Loader cannot find public symbol: MSMRdConfigSpace8 Server-4.10-1586: Loader cannot find public symbol: MSMWrtConfigSpace32 Server-4.10-1586: Loader cannot find public symbol: MSMWrtConfigSpace16 Server-4.10-1586: Loader cannot find public symbol: MSMWrtConfigSpace8 Server-4.10-1586: Loader cannot find public symbol: MSMScanBusInfo Server-4.10-1586: Loader cannot find public symbol: MSMSearchAdapter Server-4.10-1548: Load file referenced undefined public variable Module NGRPCI.LAN NOT loaded Do I need to do some "pre-installation configuration" of some public symbols? If so, where and how? Any help would be greatly appreciated. Thanks, Joe Brouillette Network+ certified as of 3/23/01

Public symbol error are indicators of incompatible files. You have to install the latest patches for NW4.1. Go to www.support.novell.com and querry 'minimum patch'.

I have been through that process before, the problem is Netware 4.10 doesn't have support for the PCI sockets. You will need to download the file from the novell website found at this link: http://support.novell.com/servlet/filedownload/pub/landr9.exe Make sure you down the server after applying the patch or it will not work until the next down time. Then bring it back up and try installing the network board again. If it still doesn't work try installing the Novell 4.10 patch kit 8 if you havn't already found at this link: http://support.novell.com/servlet/filedownload/pub/410pt8b.exe If you have anymore questions about installing the network board feel free to email me. Cheers, Julian.