Hello, Our Netware v5.1 Server is currently running at 1/2 Duplex. We want to change this to Full Duplex. Does anyone know what the best method is for doing this ? Thanks in Advance Steve.

From the server console, type "inetcfg". If INETCFG has never been run before, you'll get a message advising that some LOAD commands must be copied from AUTOEXEC.NCF. Say OK. You *may* get a message telling you that the server must now be restarted. Say OK. When the server comes back up, run INETCFG again. You should get a menu that lists BOARDS, NETWORK INTERFACES, WAN CALL DIRECTORY etc. Highlight BOARDS and hit . The server NIC should show up in the window. Hit again. The card settings will be displayed. There should be a line that says "Duplex mode" or similar. Exactly what you see will depend on the type of card. With an Intel E100-type card, it will say "Force Duplex" and the options are "0" (auto), "1" (force half), and "2" (force full). After you've made the change, all the way out to the server console prompt, then type REINITIALIZE SYSTEM. Check the switch to make sure it reports a full-duplex connection. HTH Doug B.