Security & Virus | Hardware | Windows XP | Windows Vista | PC Gaming

Netware Install - Can't detect NIC

Comment:

I'm installing Netware 5. When I get to the part where I need to install a Network Board, it's a Dlink 538tx, I then browse to the floppy and locate the drivers. I am then prompted to enter the slot number and node address, and that's where I get stuck. I found the node address on the card itself, 12 digit hex address. However, it still can't load the card. I tried every slot number (1-3) with the node address, and it still doesn't work. I also tried installing Netware 4.11 and I got stuck in the same place. Please help!!

GroupWise Rule for Time R...

Novell Server new MB/NIC ...

Post Locked

This post is quite old and has been locked from receiving new replies. Please create a new posting instead.

Summary: 1. that network certainly needs switches. you can even still make use of existing hubs with a "hub and spoke" layout. Split the network into 5 hubs or so, and connect each hub to a central switch w...

Summary: I'm having the same problem. The PC boots and the memory test confirms the 512MB of RAM. I'm using my original DOS 6.22(not from any version of WIN). I have CONFIG.SYS loading everything including the...

Summary: if you can't see the tree you have a physical connection problem. Fact that other stations are find indicated its not a netware issue. ...