Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Netware 4.10 Synthetic Time
Name: Niketan Sharma Date: March 11, 2001 at 21:55:31 Pacific
Comment:
Synthetic Time is being isuued on partition rlg.
server is novell netware 4.10 server name is rlg-ho there is no partion by name rlg it happened after installing y2kpatch of novell netware 4.10
Name: Philip Coakes Date: March 12, 2001 at 02:17:06 Pacific
Reply:
Niketan
Could RLG be the name of your NDS tree? If so , and you have no additional NDS partitions, then this is the correct name of the [root] partition that the server lives in.
Sounds like your server suffers from a wondering clock. After installing the patch, you may have rebooted the server. If this is the case, the system time prior to the shutdown may have been ahead of the time when you rebooted - lots of possible reasons - (the DOS clock does not run whilst the server is up). You probably need to shut the server down, carry out a hard reset, adjust the system clock and then bring the server up - but make sure that it is brought back up at a time that is after the time that the server thought it went down at.
ATB
Philip Coakes
0
Response Number 2
Name: Matt Date: March 17, 2001 at 13:52:26 Pacific
Reply:
Go to support.novell.com
Click on KnowledgeBase
And Find Document # 10013670
0
Response Number 3
Name: Phil Hall DTTS Date: November 3, 2001 at 10:30:54 Pacific
Reply:
Goto the server console,
LOAD DSREPAIR
then goto, Advanced options, and select Replica and Partition operations, and then select the appropriate, probably [Root].
Summary: Hi novell fans. I have a problem. How can i conect a remote dos computer to my netware 4.10 server through a telephone line? What i must do? Please help me. Thank you all ...
Summary: I was trying to install Novell Netware 4.10. The step of NIC LAN driver installation after copy file *.lan then " Rtssrv.LAN did not load. Control will be switched to the system console screen, where ...
Summary: I am trying to figure out how to login to a server running netware 4.10 I have some user information but when I type the user name it says unknown command from the system console is ther some step i a...