Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
IP config in Netware 5.1
Name: Rene Date: November 19, 2002 at 04:06:20 Pacific OS: Novell Netware 5.1/6.0 CPU/Ram: PIII 1000Mhz
Comment:
Halo,
i have a Netware 5.1 server. and i will install Backup exec on the server, but the problem is:
i have not ip address on my server.
my question is:
how can i install and configure the ip function.
Corently i am using IPX, but i can't install Backup Exec without IP.
Name: Kenneth Houston Date: December 3, 2002 at 14:15:35 Pacific
Reply:
Load TCPIP
Then you will need to load the NIC driver and bind an IP number to this. The following two lines will work for you only if you modify them for your environment.
LOAD N100.LAN SLOT=201 FRAME=Ethernet_II NAME=N100_3_EII BIND IP TO N100_3_EII ADDR=172.16.1.251 MASK=255.255.0.0 GATE=172.16.0.1
Summary: Hi, I need to configure any Workstations to Remote IP BOOT in Netware 5.1 How do it?? I was install client for Dos and configure IP address im my machine But i donīt atach in the server , but i ca...
Summary: We are having problems with our NetWare 5.1 server. It keeps having critical errors in various different places and restarting itself. It is not always the same NLM that goes wrong. Does anyone hav...
Summary: Hi Folks, We have Novell Netware 5.1 installed in DELL 2850 server.This is a live server. We wanted to create backup server for this Novell server. The purpose is we need to have a standby server if t...
0 
