Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
How to use Novell 3.12 Server Manager Utility
Name: Steven Nguyen Date: January 5, 2001 at 03:03:49 Pacific
Comment:
Hi, I am kind of new to Novell. We've got an error on the server "Station x record lock threshold exceeded. Violation ####" Anyway, Novell Doc says to increase the number of record locks either in Startup.ncf or Servman.nlm. Can someone help me with either function? My question is which one is better - set the parameters in startup.ncf or load servman.nlm? How do you use the Server Manager Utility to set it. How do you change the number of record locking permanently on Netware 3.12?
Name: jivesh Date: January 5, 2001 at 18:00:36 Pacific
Reply:
Use the Startup.ncf as this file is executed after dos but before the server becomes a 'server'.
0
Response Number 2
Name: mark Date: January 22, 2001 at 20:23:52 Pacific
Reply:
make sure to change the startup.ncf from the dos partion. down the server then edit the startup.ncf if you type the command set at the console when the server is running you will see the set command option list. these changes can cause problems so back up the file first. good luck
0
Response Number 3
Name: jazz Date: December 13, 2001 at 05:34:35 Pacific
Reply:
how to more volume's on a novell netware v3.12 on a single harddisk or increasing the speed of the volume or just help me how to install win95 on a netware server so that it could be accessed by any one of them
Summary: I have the following configuration: Novell 3.12 Server with 2 NIC's NIC 1: 100MBit twisted pair NIC 2: 10MBit BNC historically the 100MBit Net has IP addresses 13.11.0.XX mask 255.255.255.0, the 10MB...
0 
