Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
How to Obtain IP address
Name: Alex Date: September 15, 2002 at 14:19:22 Pacific OS: Netware 5.1 CPU/Ram: celeron 400/512 ram
Comment:
I just installed Novell Netware 5.1. After entering "Enter the server name". It now asks "Specify the network protocol for each network board. How can i obtain IP Address, Subnet Mask, Routher(Gateway)? I cant looked into properties or a file menu.
Name: Underdog Date: September 15, 2002 at 16:21:18 Pacific
Reply:
Is this Netware Server used @ home or on a company network? And which type of Netware 5.1 install are you doing, a SIMPLE install? If it is on a company network either the LAN or WAN Admin(s) will have all this information.
0
Response Number 2
Name: Alex Date: September 15, 2002 at 21:45:28 Pacific
Reply:
Yes, this Netware is being used at home. Yes, a simple install.
0
Response Number 3
Name: stan Date: September 16, 2002 at 05:33:54 Pacific
Reply:
Then you can make up your own. Doesn't matter as long as it conforms to IP naming standards. Eg: 10.1.1.2 255.255.255.0 10.1.1.1
0
Response Number 4
Name: Alex Date: September 16, 2002 at 07:07:47 Pacific
Reply:
Stan, im running a network in my house with 2 other computers. Should i follow their ip paths and keep the host different?
0
Response Number 5
Name: vivek Date: September 17, 2002 at 09:01:59 Pacific
Reply:
sir, but why use any other ip address plz help me give me reply
Summary: How to assign Ip address in Novell Netware 4.11 server. I have enable TCP/IP in INETCFG command. Can you help me out to assign IP address for the Netware 4.11 server. ...
Summary: at the NetWare command prompt: INETCFG From the Internetworking Configuration menu - select Protocols From the Protocol Configuration menu - select TCP/IP TCP/IP Protocol Configuration menu: Set the T...
0 
