how to connect win-98 pc to netware
|
Original Message
|
Name: SARFARAZ NAWAZ
Date: October 24, 2002 at 10:18:01 Pacific
Subject: how to connect win-98 pc to netware
OS: novell netware 3.2
CPU/Ram: pentium-II / 32 MB
|
Comment: Please provide full procedure that
how to connect a windows-98 pc to novell netware 3.2?
Report Offensive Message For Removal
|
|
Response Number 1
|
Name: Alan
Date: October 24, 2002 at 12:27:21 Pacific
|
Reply: (edit)Download and install the latest Novell client software on the Windows 98 computer. Then, when it is installed, set up the Client with the information necessary to connect to the server (you can do this from the logon screen).
 Report Offensive Follow Up For Removal
|
|
Response Number 2
|
Name: sarfaraz nawaz
Date: October 26, 2002 at 07:15:40 Pacific
|
Reply: (edit)Thanks, Is this necessary to add another protocol or tcp/ip address in network properties.
Report Offensive Follow Up For Removal
|
|
Response Number 3
|
Name: Underdog
Date: October 26, 2002 at 11:01:58 Pacific
|
Reply: (edit)If you are using NW 3.x "right out of the box" you do not have TCP/IP capabilities. You would have to add that with Novell's TCP/IP Suite. The standard protocols for NW 3.x are IPX/SPX. V-Peace-V
Report Offensive Follow Up For Removal
|
|
Response Number 4
|
Name: Mark Pilkanis
Date: October 29, 2002 at 17:19:18 Pacific
|
Reply: (edit)Or, depending on your budget, you might consider upgrading your old 3.2 server to a higher version. You've probably discovered that Novell no longer supports 3.x or 4.x. You must use IPX/SPX and Bindery with version 3.2.
Report Offensive Follow Up For Removal
|
Use following form to reply to current message:
