Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
How to assign IP address in Netware
Name: Asai Date: September 10, 2002 at 23:55:53 Pacific OS: Netware 4.11 CPU/Ram: PII 300MHZ
Comment:
How to assign Ip address in Netware 4.11 server. I have enabled TCP/IP in INETCFG.
Name: Chris Date: September 11, 2002 at 14:34:47 Pacific
Reply:
Go back into INETCFG and select the Binding menu option. Once in there hit the insert key and select IP. You will be presented with a configuration page to where you enter the IP, Subnet Mask and a frame type of Ethernet II. Make sure after entering in the new information, hit the enter key. Then hit the ESC button and elect to Save the entry. After exiting INETCFG you can either type at the console prompt: reinitialize system or you can reboot the server. Don't forget to update the SYS:ETC\hosts file with the name and IP address of the server. Some flaky issues might arise if you don't.
Summary: How to assign Ip address in Novell Netware 4.11 server. I have enable TCP/IP in INETCFG command. Can you help me out to assign IP address for the Netware 4.11 server. ...
Summary: Can i assign multiple ips to a single Ethernet card in Netware server, if yes how to assign the different IPS of different subnet to single card and how to assign differnet gateways to these two ips...
Summary: I just installed Novell Netware 5.1. After entering "Enter the server name". It now asks "Specify the network protocol for each network board. How can i obtain IP Address, Subnet Mask, Routher(Gateway...
0 
Oracle access via NScript...
