i am have problems with client 3.3 instaled in windows 98 workstation. The problem is: when I load dos prompt, the key "0" (zero) in numeric keyboard (num lock) not works fine. when pressed the zero key not show in dos prompt, but in windows enviroment works fine. with the client 3.21 itīs works fine, but I need use client 3.3 in workstations because itīs minimum software requirements for ZfD 3. sorry for my english very bad... Thankīs

I find a solution in support novell web site: TID 10057492 Best regards Rafael SUPPORT HOME '"0" key will not work in a DOS environment (Last modified: 29JUN2001) This document (10057492) is provided subject to the disclaimer at the end of this document. Printer friendly version of this document Forward this document to a colleague Submit comment about this document to its author no keysno keys---------------------- Fact Novell NetWare 4.11 NetWare 4.2 Novell NetWare 5.0 Novell Netware 5.1 Novell Client 3.3 no keysno keys---------------------- Symptom '"0" key will not work in a DOS environment with Client 3.3. no keysno keys---------------------- Cause Installed Novell Client 3.3 on the workstation. no keysno keys---------------------- Fix Update ZenRC32.exe with on that is dated later than October 6, 2000. Copy into the C:\Novell\ZenRC directory on the workstation. You can currently download the ZENworks for Desktops 3 Beta support pack which includes a newer file by going to www.support.novell.com and then file finder and search for "b2zfd3sp.exe" to download the Beta support pack. After extracting the support pack, you can copy the newer version of ZenRC32.exe to the workstation and verify if it fixes the problem. no keysno keys---------------------- Document Title: '"0" key will not work in a DOS environment Document ID: 10057492 Solution ID: NOVL28740 Creation Date: 09OCT2000 Modified Date: 29JUN2001 Novell Product Class: Management Products NetWare Novell Product and Version: ZENworks for Desktops NetWare 5.1 Novell Clients ZENworks 2