Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Amount of RAM available???
Name: stange Date: January 8, 2003 at 12:30:51 Pacific OS: 5.1 CPU/Ram: 1
Comment:
How can I calculate available RAM of a Netware server that is up and running. I'm not sure if the server needs an upgrade, so I'd like to see how much is being used.
Name: dunce Date: January 8, 2003 at 19:00:12 Pacific
Reply:
More RAM the better.
Check the Original cache buffer to available cache buffer. It should be above 35% (don't quote me on this but one buffer = 4K page of memory), further check, quite frequently, the LRU i.e. the Least Recently Used sitting time in monitor. This should be 15 minutes or more.
0
Response Number 2
Name: stange Date: January 9, 2003 at 06:14:28 Pacific
Reply:
35% of what?
0
Response Number 3
Name: Nutsky Date: January 14, 2003 at 13:25:44 Pacific
Reply:
Easy from the command line enter the command display memory that displays the total memory installed. Also be aware that with NW 3.x more is NOT always better. From 4.x on it fine but 3.x suffers from a TOO much memory problem.
Summary: There are some TID's on Novell's site for that. However, there are several formula's to calculate the amount of RAM. There's seperate TID's for 3.12 and 4.2 You'll need the processor speed and harddis...
Summary: It is recommended the in NW 6.0 the DOS partition be equal to the amount of RAM plus 200 MB. Now how does one tell DOS to make a partition that large. ...
Summary: Hello when I try installing 5.0 on my AMD 900mhz 512mb sys the I recieve the error that installation cannot continue because I do not have enough ram memory installed. I tried the Novell fix and remo...
0 
