Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
will not power up
Name: mac clone Date: January 18, 2002 at 20:04:49 Pacific
Comment:
I have a powerwave tower (mac clone) and it will not power up (it holds power and then loses it, no boot thought, just a couple of seconds of power). Could it be the battery? where is the battery located? the power supply? Any advice would be appreciated
Name: the pickle Date: January 18, 2002 at 23:35:50 Pacific
Reply:
Might be the battery, but more likely another problem.
The battery should be fairly obvious; it's about half the length of a double-A and usually purple, red, or white. It might be in a black rectangular holder.
The power supply is the big greyish box that has the huge fan and power cords coming out of it :)
Summary: I have a powerG4 500mhz with 1 gig pc133 ram that will not power up unless I press the reset button near the pram battery. Any ideas about fixing this. I have replaced the pram battery already and no ...
Summary: After installing a new hard drive and reassembling the computer (powermac6500/250) it will not power on unless you "softboot" once or twice, the computer is equipped with a converter for the monitor t...
Summary: hi i have a performa 5200 i was hoping to sell but on testing it i find it will not wake up from sleeping- screen stays dark and i have to restart the machine-turn the power off at the back 1 any id...
0 
