Hi, I recently moved from a G3 to a G4. I was using an external SCSI CD-Writer via a PCI slot with Toast 4 application. When I moved to the G4, I installed the PCI board and installed Toast 3 (Toast 4 installation discs were not available). Now I cannot see the external CD-Writer. I attached a zip drive to the PCI card and I can't see that either. IN Apple System Profiler, the following was listed for the relevant slot. Slot SLOT-D PCI Slot Card type: Not available Card name: pci9004,7850 Card model: Not available Card ROM #: Not available Card revision: 3 Card vendor ID: 9004 Does anyone have any idea what I should tr

did you ever get a response or find a solution for this problem? Any help would be apprciated! Trying to mound a hard drive \ MS SCSI PCI Comment: Hi, I recently moved from a G3 to a G4. I was using an external SCSI CD-Writer via a PCI slot with Toast 4 application. When I moved to the G4, I installed the PCI board and installed Toast 3 (Toast 4 installation discs were not available). Now I cannot see the external CD-Writer. I attached a zip drive to the PCI card and I can't see that either. IN Apple System Profiler, the following was listed for the relevant slot. Slot SLOT-D PCI Slot Card type: Not available Card name: pci9004,7850 Card model: Not available Card ROM #: Not available Card revision: 3 Card vendor ID: 9004 Does anyone have any idea what I should tr

Have the same problem. My pci9004,7850 comes from a Nikon scan pack with an installer so that the card was recognized. But I have reformated the HD (problems with OSX), can't find the software nikon so that my pci card can't be recognized...

I have the same problem. I purchased a refurbished G3/400 and it came with the pci9004,7850 that is not recognized. I don't know where to turn. I would like to hook my scsi external iomega zip drive to this card- since it is already a DB25. Any information

I had the same problem. You just need to hunt down the software driver. I copied it from the computer I used to use the card on. I'ts called Adaptec SCSI Card 2906 Driver. Good luck.

Hi, I had the same problem: I recently installed an old scanner's software and it pratically wracked my G4 because everything had to reformated again to get it to work. Everything is working more or less except that my CD recoreder and scanncer is still not working and it's not recognized in my apple system profiler. IN Apple System Profiler, the following was listed for the relevant slot. Slot SLOT-C PCI Slot Card type: Not available Card name: pci9004,7850 Card model: Not available Card ROM #: Not available Card revision: 3 Card vendor ID: 9004 I had gone to the web and hunted down the software driver "called adaptec SCSI Card 2906 driver" and put it in my extension folder but it still does not work. Any ot