This will help with PCtel. http://www.openhardware.net/misc/WinModems.html

0

I need drivers for my PCTel 56K modem, for dos, beos or linux, any one have drivers? I know the modems crap, but it's built right into my mainboard, just like the video, lan, sound, ide, fdc, EVERY THING, Not one agp, isa or pci slot in the computer, but i can't afford to replace it, it's a PCChips Mainboard, took me 2 hours to find that out, pcchips is even so emmbaresd they won't put thier name on it! but anyways, if u have drivers for any of these Please, email them to me, Please, Reece400

0

Nvr mind the linux one, i got it, but still, if u have the boes or dos drives, please email them to me at, Reece400@subdimension.com Reece400

0

need PCTel modem Driver for chipset 879(On board)-Motherboard PC100-Pentium III. Internal modem 56k.

0

I need a driver for PCTel HSP Internal Modem... Kindly send me thru my email. Your input is highly appreciated.

0

Try, http://www.o2.net/~gromitkc/winmodem.html#drivers It may work for u.

0

Hi I have PCTEL HSP 56k internal call. It was working fine with internet. when i am using voice chat, the system is being rebooting.Pls provide me some solution Your input is highly appreciated regards Srinivas.ch

0

I need a drivers for PCTel HSP Internal Modem...

0

i am in need of a v90 driver for modem chipset pct789 thanks

0

I HAVE Compaq Pressario 33.6-df56k the INTERNAL MODEM. The computer Compaq 2200 under WIN95 is defined(determined) as the unknown device on adjusting CD it(him) äðàéâêðà has not found. KINDLY HELP ME

0

I have a Pctel 56K micromodem it works fine under win95 but under Red Hat Linux 6.0 it is not working could u please help me out by sending me the drivers or telling me where i can get these drivers.

0

I've physically removed my HSP PCTel modem from my system in hopes of using another modem. Though I've done the Control Panel/HSP/Uninstall as well as the Control Panel/System/ removing of the modem, the system detects it upon reboot. Are there registry edits that are mandatory in removing this modem? Any advice would help.

0

I need the pctel driver. Thanks

0

I have been desperately trying to get a working win2K version for an hsp56 internal modem. Anyone out there to help please ?? Please email me if possible. Thanks. fruko@one.net.au

0

Ok,heres the thing,My PCTEL HSP modem installs itself on a comport that doesnt exsist!? the comport that it goes on is not in the system listing nor does WINDOWS 98 reconize it any one got any help?

0

i need the latest HSP56 micro modem Driver...

0

I have configured it and dialing numbers from it but i have no internet account so i never try to connect to any Isp from it if you want to know how i did it then mail me

0

I get the pctel module driver from ESC_drivers.tar.gz packge..it compiled well, so i used minicom to test it and it dials! BUT after logged and get an IP i couldn't establish the ppp connection with pppd it couldn't register ppp0. Someone get ppp0 registered with pctel linux driver? please mail-me. Im using a PCtel HSP56 on-board micromodem with slackware 2.2.17 linux.

0

I need a driver for PCTEL modem HSP-336 de luxe. It seems to be file : pctwave.inf. Can somebody send it to me??

0

I have the same problem- My girlfriend only has the japanese driver for the HSP56 micromodem in her laptop. SInce then I have reinstalled Windows ME in English and it dosen't like the Japanese driver- don't expect PCtel to help either- bunch of jerkoffs

0

Hy, I´m new in Linux and I don´t know how I have to do for that modem works fine, Somebody can help me?? I have a Linux Mandrake instaled in my computer with HSP56 Micromodem and chipset ALI[10B91621] Thanks

0

Can anyone kindly sent me a driver for PCTel Inc HSP Micromodem 56 to work in Red Hat Linux 7.0 ? Also, I am new to Linux. Can you also give me step by step guideline to install the driver ? Thank you

0

Hello!! I am looking for a driver for a V.90 K56Flex HSP PCI (internal) modem for my Elonex Pirahna laptop...If anyone could help or advise it would most appreciated. Thank you! e-mail: pupps_virdi@hotmail.com

0

I need a driver for PCTel HSP Internal Modem 33.6 that can create the virtual PCTel port and define the modem under NT system

0

I am trying to get my PC-Tel HSP 33.6 modem to work under Win2K with no luck... anybody have any suggestions? Please email me your suggestions or email a driver to me, as I doubt i'll be able to find this message board again. Email me at my aol account... mikeik@aol.com

0

I have a pctel hsp, I installed the modem, however the error messages is "can't open port"

0

I had downloaded first a version of HSP-Micromodem 56K, and worked very well in my Red Hat 6.2, but I installed the Red Hat 7.0 and when I tried to init the modem with "insmod pctel.o" a message appears saying about a problem with the version, "the kernel version is 2.2.xxx but this file was compiled for version 2.4" and when I modified the file "version.h" to the same kernel version of the message says, my modem worked, but when I tried to connect to Internet had a problem with the kernel, somebody has this problem? and somebody could help me to repair this error? Thanks.

0

PLEASE HELP!!! Need HSP 33.6 f---ing Modem a f---ing driver for Linux Mandrake 8. Something available? Thankyou Guys!

0

PcTel DISABLING info: Ok, someone there asked how to disable the modem once It is physically disconnected, well, there is a JUMPER on the motherboard that Does that stuff.. just look in your motherboard manual and Toggle that jumper =), that's the solution.

0