Hi all, i found the following driver for my conexant winmodem while searching the net. it is fully functional and operates at maximum possible speed i am using knoppix 3.7 with kernel 2.4.27 i am posting this link so that it may be of use to others http://linux.dell.com/files/ubuntu/...

i nearly forgot it is an internal pci modem under windoze it is described as softk56 data,fax pci modem in the device manager

http://www.conexant.com/support/md_... A good place to start is the device mananger. You should see under the properties of the devies a string that includes something like this. PCI\VEN_14F1&DEV_1035&SUBSYS_1035148D&REV_08\4&8537DD&0&58F0 The go to linux sites for your vendor's ID and the device to see what linux support is for it. Above is vendor 14F1 and device is 1035 I have not tried it but I thought I read that you might get ndis wrapper to work with your windows drivers. http://ndiswrapper.sourceforge.net/... http://www.int21.de/conexant/ http://www.linuxant.com/drivers/ is a place to try their drivers. I read it wrong and answer it wrong too. So get off my case you peanut.

http://www.linuxant.com/drivers/

why are you running 3.7? with 256 mb you can run 5.1 larry