Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Internal 56K US Robotics Modem
Name: Budorcas Taxicolor Date: October 8, 2003 at 09:41:42 Pacific OS: Red Hat 9 CPU/Ram: Intel P4/256MB
Comment:
Hi everyone,
As a new user of Linux I am really enjoying learning it. I have installed red hat 9 and everything seems to work pretty fine except the internal 56K US Robotics modem. I could not make it work. I would be very grateful if anyone of you can help me with this problem.
Name: egkenny Date: October 8, 2003 at 17:24:43 Pacific
Reply:
Which internal 56K US Robotics modem do you have? You have to be more specific.
For instance I have a US Robotics Performance Pro Model 5610 modem which is a hardware PCI modem. I can verify this by typing the command: cat /proc/pci | grep -e Robotics I get the following response: Serial controller: US Robotics/3Com 56K FaxModem Model 5610 (rev 1).
Thank you for your quick suggestion. I have pci 56k us robotics modem, in windows 2000 it shows US Robotics 56K Voice Host Int. I tried supplying the above command but it does not show anything. Please help me to set it up.
0
Response Number 3
Name: 987 Date: October 10, 2003 at 12:33:31 Pacific
Reply:
Try just 'cat /proc/pci' Then look for your modem in there. The 'grep' part was for just showing the line that has the word 'Robotics' in it
Thank you! It shows a number of list saying that PCI devices found. I think the one related to the installed modem is below.
Bus 1, Device 3, function 0: Communication Controller: PCI device 14f1:2f12 (Conexant) (rev 1). IRQ 5 Master Capable. Latency=32 Non-Prefetchable 32 bit memory at 0xff8e0000 [0xff8effff] I/O at 0xdc00 [0xdc07]
It shows as Conexant, right? But my modem is US robotics and the model is USR263094.
Summary: Hi, I'm in the middle fo migrating to linux and i have a problem, when i started i didn't think about the fact that my modem was made by US Robotics. It isn't a 'win' modem, but it dont seem to want ...
Summary: I have a US Robotics external modem connected to ttys0 and it connects fine but will freeze and lockup the entire machine at random times. I used to think it was Linux, but I have now reduced it to t...
Summary: Does anyone know what the jumper settings for a 56K Internal ISA US robotics modem? At the moment all the jumpers are only covering one pin rather than bridging between two. Or if some one could advis...
0 
