Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
config switch with minicom
Name: c4ifford Date: April 23, 2008 at 09:17:40 Pacific OS: RHEL4u4 CPU/Ram: 2.5Ghz x3 16GB Product: HP
Comment:
I'm trying to configure my HP procurve switch but I can't seem to get minicom to connect to it, I believe I have all the settings right i'm using a baud of 9600 8n1 it connects and says online.. but i get no feedback from the switch..
Name: c4ifford Date: April 23, 2008 at 11:25:11 Pacific
Reply:
well I got my switch to work with hyperterm after trying a few different things, Had to reset the switch, use a 2400 baud connection and make sure it was set to ANSI
Summary: Unreal tournament: www.tuxgames.com For a story about it: http://www.linuxworld.com/story/32796.htm It appears you need a nvidia graphic card for it to work correctly, but read it yourself. I've somet...
Summary: I'm using a Red Hat 9 Modem U.S.Robotics 56K Message Modem. Installation Ok, the modem answer, i can reach the ISP, the remote modem answer. I used this string: /usr/sbin/pppd /dev/ttyS0 57600 debug ...
Summary: I would recommend first of all changing the DHCP server to keep it all in the same class of IP's. Its odd that they are fluctuating between a 192.168.*.* addy and a 169.254.*.* address. I am not sur...
0 
