Tom's Guide | Tom's Hardware | Tom's Games
![]() |
![]() |
![]() |
Hi,
I was trying to install the conexant drivers. While installing, it gives the
following error messages:This package does not contain pre-built modules suitable for your system:
Distribution: RedHat-7.9
Kernel arch: i586
Kernel version: linux-2.4.2-2Please obtain the appropriate variant of this package for your system or try the generic RPM or tar version
execution of hsflinmodem-5.03.27lnxtbeta03042700k2.4.20_9-1rh script failed, exit status 1
I was trying to install this
hsflinmodem-5.03.27lnxtbeta03042700k2.4.20_9-1rh.i586.rpmThis is the information about my modem keeping in mind that Rockwell is in fact Conexant
RESULT OF MODEM QUERY =
MODEM #1:
PCI CONFIGURATION INFORMATION READ:
Vendor Id : 127A
Device Id : 2014
Revision Id : 1
Sub Vendor Id : 122D
Sub Device Id : 4055DEDUCED INFORMATION:
Vendor Name : ROCKWEL
Device Name : HSF Data/Fax/TAM
Modem Type : HSF
Subvendor Name :AZTECH -- http://www.aztech.com or PACKARD BELL : http://www.packardbell.comThanks

I use the same type drivers for my dell laptop... Your using the wrong driver if you have a 2.4.2-2 kernel.. You should be using:
hsflinmodem-5.03.27lnxtbeta03042700k2.4.2_2-1rh.i586.rpm
uname -m
and
uname -r
to make sure you have the right info...
It will be: /dev/ttySHSF0 and you shouldn't have to run HSFCONFIG. Just set it up thru 'network' after the rpm completes..Jon

![]() |
![]() |
![]() |

This post is quite old and has been locked from receiving new replies. Please create a new posting instead.
| Ads by Google |