Security & Virus | Hardware | Windows XP | Windows Vista | PC Gaming

What ram do I need

Name: Bob
Date: November 24, 2003 at 10:18:41 Pacific
OS: w98 se
CPU/Ram: 200mhz /32mb

Comment:

I have a old dino Compaq Deskpro for my son and it only has 32 mb of sdram and the manual says it'll hold 384 mb of this sdram Is this the pc100 or pc133 ram?? Any ideas??

Name: sam
Date: November 24, 2003 at 10:25:32 Pacific

Reply:

Go to www.crucial.com. They help you determine the correct RAM for your machine. It's pretty easy to make a mistake and get the wrong type.

0

Reply:

look at the ram you already have installed. it is usually a sticker on the chip that will tell you if it's 100 or 133

0

Name: SkipCox
Date: November 24, 2003 at 11:02:54 Pacific

Reply:

Bob, I think you'll find 66Mhz EDO ram in that compaq...but it's good advice to check with crucial and/or compaq support. Skip

0

Name: Bob
Date: November 24, 2003 at 13:47:33 Pacific

Reply:

Hi guys , yes it is a 66mhz,but it has sdram 168pin THANKS EVERY ONE

0

Gateways, good or not?

wireless network setup

Post Locked

This post is quite old and has been locked from receiving new replies. Please create a new posting instead.

Summary: I have a maxtor HD that has a burnt curcuit on the bottom. What screwdriver do i need to take it apart safely? Its a Maxtor 250GB internal M# 6Y250PO. I heard its something like a Torx T(something)...

Summary: Hi I am new but can assemble a PC. I got a computer with an ASROCK K7VT2 motherboard 1800 AMD Duron processor. I got 2 SD-RAM and 2 DDR-RAM slots inside. Right now I have 2 SD Rams 128x2 inside. I wan...

Summary: I need help finding out what kind of processor I need. here is the Info I have so far. Mainboard: Intel Model WL810E Chipset: Intel i810E Southbridge: Intel 82801AA (ICH) What else do I need to know a...