what motherboard should i buy to support my new video card

Xfx Radeon hd6570 1gb ddr3
December 26, 2011 at 19:26:51
Specs: Windows 7, 3072MB RAM
what motherboard should i buy to support my new graphics card?
----------------------
i have a:
General Information :
Manufacturer : PEGATRON CORPORATION
Product : Narra6
Version : 6.01
Serial Number : X312345678
Support MP : Yes, 2 CPU(s)
Version MPS : 1.4

Chassis Information :
Manufacturer : Hewlett-Packard
Type : Desktop
Version : Chassis Version
Serial Number : Chassis Serial Number
Asset : Asset-1234

OEM Support :
HPET : Yes
SLIC : Yes
SLP OA : v2.0
nVidia SLI Ready : No

Sensor Information :
Hardware Monitoring : Asus F8000

On-Board Device Information :
Embedded Controller : Yes

Slots Information :
Slot PCI-Express : 32-bit [3.3v, Shared Slot Opening] - Empty
Slot PCI-Express : 32-bit [3.3v, Shared Slot Opening] - Empty
Slot PCI-Express : 32-bit [3.3v, Shared Slot Opening] - In Use
Slot PCI : 32-bit [3.3v, Shared Slot Opening] - Empty

External Connectors :

EEPROM Information :
Type : EEPROM Specific
Address : 0x57
---------------------------
AND A:
General Information :
NorthBridge (SPP) : nVidia GeForce 6100V
NorthBridge : AMD K10 Bridge
SouthBridge (MCP) : nVidia MCP61

NorthBridge Information :
Architecture : Northbridge
Manufacturer : nVidia (Hewlett-Packard Company)
Codename : MCP61
Revision : A3
Multiplier : 8x

NorthBridge Information :
Architecture : Northbridge
Memory Controller : Integrated
Manufacturer : AMD
Revision : 00
Multiplier : 8x
Bus Speed : 200.9MHz
FSB Frequency : 1004.6MHz
HyperTransport Clock : 1000MHz
Upstream : 16-bit
Downstream : 16-bit
HTT max. Support : 2000MHz
RAM max. Support : DDR2 (800MHz)

Memory Information :
Type : DDR3-SDRAM PC3-8600
Frequency : 535.8MHz
DRAM/FSB Ratio : 8/3
Supported Channels : Dual
Mode : Unganged
Activated Channels : Unganged
ECC Diagnostic : Yes - Disabled
CAS Latency (tCL) : 7 clocks
RAS to CAS (tRCD) : 7 clocks
RAS Precharge (tRP) : 7 clocks
Cycle Time (tRAS) : 20 clocks
Bank Cycle Time (tRC) : 27 clocks
Command Rate : 1 T

Physical Capabilities :
Multi-Processor : No
128-bit RAM : Yes
ECC : Yes - Disabled
ChipKill ECC : Yes - Enabled
HTC : Yes
UnGanging Support : No
Multi VID Plane : Yes
DRAM Scrub Rate : Disabled
L3 Cache Scrub Rate : Disabled
L2 Cache Scrub Rate : Disabled
L1 Cache Scrub Rate : Disabled
Memory Frequency (max.) : 1067MHz

APIC Information :
Version : 1.01
Maximum Interrupts : 24
IRQ Handler enabled : No

Device Capabilities (PCI) :
I/O Access : No
Memory Access : Yes
Bus Master Capable : Yes
Special Cycle Recognition : No
Memory Write & Invalidate : No
VGA Palette Snoop : No
Parity Error Response : No
Cycle Wait : No
System Error Line : No
Fast Back-to-Back : No
Detects Parity Errors : No
User Defined Format : No
PCI 66Mhz Bus Support : Yes
New Capability List : Yes
PCI Support : Hyper-Transport
PCI Support : Hyper-Transport
-------------------------------
need to support a Xfx Radeon hd6570 1gb ddr3 video card. any suggestions, and please i need it to be nearby, like best buy in newton or witchita, Kansas. i live in Hesston KS.
-------------------------------
thank you.


See More: what motherboard should i buy to support my new video card

Report •


#1
December 26, 2011 at 20:33:52
You should stick to one thread. You do NOT need a new motherboard, you need a new power supply. The one you have is garbage! And why are you buying from BestBuy? You should be ordering your parts online from Newegg, TigerDirect, etc.

For instance, how about this Corsair 500W for just $30 after rebate & $10 off code?

http://www.newegg.com/Product/Produ...

Notice the specs - active PFC, 80 PLUS Certified, 12V@34A, 3 yr warranty.

Now compare those specs to the crappy 480W unit that you wrote about here:

http://www.computing.net/answers/ha...


Report •
Related Solutions


Ask Question