Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
usb ports...DEAD!
Name: chelle Date: August 25, 2002 at 14:36:09 Pacific
Comment:
Maybe some can help? All 4 usb ports won't work. System reports error code 10. They work until comp. has completely booted up then won't. Device manager says generic hub has prob. saying tranfer requests failed so hub was disabled. Already tried putting entire system back to factory state. Did not work. Tried updating drivers too...nothing. I appreciate any help. THANKS!!!
Name: pdiddy Date: August 25, 2002 at 14:39:16 Pacific
Reply:
you will have to go into the bios settings and see if the usb is disabled, if it is just enable it. or you can go buy a usb pci card, they're pretty cheep nowdays
0
Response Number 2
Name: chelle Date: August 25, 2002 at 14:44:47 Pacific
Reply:
Thanks, I have checked the BIOS setting too. They are enabled but do not work.
Summary: Elements permanently connected to my computer with USB: 1.- laser print 2.-Injection print 3.- Mouse 4.- Scanner Elements temporaly connected to my computer with USB: 5.- HD external 6.- Nokia n95 7.-...
Summary: The fact that your input combo isn't working doesn't necessarily mean the USB ports aren't working. When using wireless you need to verify there is communication between the base and the KB/ mouse. ...
Summary: My son's K7S5A W2K system just developed "dead" USB ports. The DevMan shows "!" for these devices and error 28 - they just can not be enabled even if uninstall/install driver is done. I plugged a USB...
0 
Bad bios chip, or bad mot...
