Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Server Setup
Name: gardenair Date: July 16, 2005 at 22:38:07 Pacific OS: win98 CPU/Ram: 500
Comment:
I need guidence about Acer set up configration . Just like in normal computer we use F1 key or Dell key to enter setup. Server setup is different than normal computer. Just like how to make RAID .Easy configration,Which SCSI Drive is in the machine & it is in active position etc etc. I need a complete guidence about it. Plz can u guide me for any site where can i learn Server configration . thanks
Name: Curt R Date: July 17, 2005 at 05:47:43 Pacific
Reply:
You should have received documentation with your server telling you how to do what you need to do.
Normally F1 or Del is still used to get into the motherboard BIOS.
Getting into the RAID controller BIOS depends on the RAID controller but they almost all show you during the POST. Adaptec uses Ctrl-S but you have to wait til it comes up during POST and says to hit it to access the RAID BIOS.
Summary: I am still running an old nt server 4.0 sp6. I foolishly enabled RAID 1 (mirroring) through windows software RAID that's controlled by the management console within windows. Somehow, my boot passwor...
Summary: Hello, I've been having a lot of pc problems latly... Here is my servers setup Pentium III 750 mhz 320mb ram 7 Hard Drives (4 on mboard, 3 from pci ide card) 1 Cd-Rom I went to add two more hard drive...
Summary: Dick - Thanks for the heads up. Unfortunately, I don't think my wife is going to let me buy any more drives right now. I went wild a couple of months ago and bought 20 10,000 RPM drives "just to be...
0 
built comp
