Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
I took an old hard drive out of my old computer tto install into this new set up. It is a Maxtor Diamondmax 10 drive model # 6V200EO SATA II drive I plugged directly into the mother board.
When I connected it I assumed that it would automatically detect as the slave ( it also has windows xp on it),
It booted through the 1st drive hit an error and then rebooted again onto the ssecond drive ( the one I'm trying to install as the slave).
I shut down and unplagged the HD. Started back up and then plagged the "slave" in. It saw the " slave drive".
Do I need to remove windows from the "slave drive", is it a bios setting I didn't do or something else I'm missing.
Summary: Hi, I have an ASUS P4P800 motherboard with a 120 GB IDE hard disk drive with Win 2000 PRO installed. I also have 2 CD / DVDRW installed and I am adding a new 200 GB Western Digital SATA drive. It sees...
Summary: I installed a SIIG SATA controller card, and attatched a new SATA drive to it. Well, I don't see the drive anywhere in the Computer Management/Local storage section. I've got the drive plugged in to a...
Summary: I'm going to buy a new sata drive soon and was wondering if I needed to install the sata driver during the XP installation or should I install XP then install the new Hyperion Pro drivers in windows? ...
Substitute for a mouse wh...
