Tom's Guide | Tom's Hardware | Tom's Games
![]() |
![]() |
![]() |
Hi, I am having a problem with my friends laptop, when it boots up an error message appears saying “ERROR
Resource Conflict - PCI Network Controller
Bus:02, Device:06, Fuction:00"
Press F1 to resume"I press F1 to boot into windows, everything loads fine, when fully loaded the add hardware wizard pops up, I direct it to the drivers but it never finds then, says "Cannot install hardware"
I don’t understand why it is doing this maybe it needs a bios update; however I am unable to find the latest bios for the board,
It currently uses phoenix bios 4.0 release 6.0Any suggestions please would be much appreciated, thanks!

do you need to use the network hardware?
If not, can you disable it in the BIOS/Setup and that should stop it giving this message

Yeh he wants to be able to use the wireless network
I have read that I might be getting the message because the card may have become unsettled and if I open the laptop up reset the card it may solve the problem, is this a good solution, unsure to try it as I have never open up a laptop before other then the easy access slots, memory, battery etc...

Check your bios settings for resources: there might be an option for automatic configuration: or if the pc is older, it might have a parallel port or something like that could be disabled, and fix the problem.

i have disabled everything possible in the bios still the message appears. the chipset is a intel 855pm running phoenix bios 4.0 release 6.0 which seems to be the latest, so am stump, i cant think of anything else other then opening it up and checking the card has not become dislodged!

![]() |
![]() |
![]() |

This post is quite old and has been locked from receiving new replies. Please create a new posting instead.
| Ads by Google |