Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Click here to start participating now! Also, check out the New User Guide.
Removing The Tower Cover
Name: compaqguy200 Date: March 2, 2004 at 01:16:39 Pacific OS: Windows 98 CPU/Ram: IBM Intel Pentium II / 64
Comment:
Removing the case cover. I have an IBM Personal Computer 300 GL with a ridged plastic case. It looks like the caseing just slides, snaps or pulls apart. It appears to have no screws that have to be removed in order to remove the case cover from the tower. My question is are there any secret or hidden buttons I need to push in order to remove the plastic case from the computer tower. I am having a heck of a time and all I want to do is replace the modem. Thankls for any help.
Name: chrisman7 (by chrisman.7) Date: March 2, 2004 at 04:33:03 Pacific
Reply:
on mine i have a place under the front of the pc that has a little lever you squeeze it then pull forward make sure that the lock on the back is disengaged but i would just look up your manual on line to find out every pc tower is different
KEEP i SIMPLE
0
Response Number 3
Name: robdos Date: March 2, 2004 at 06:13:01 Pacific
Reply:
Hense my posting of the manual.
0
Response Number 4
Name: compaqguy200 Date: March 2, 2004 at 06:31:20 Pacific
Reply:
Thanks Rodos for the fast reply you guys are great.Could you give me another link to go to in order to get to the website you mentioned. It would not come up for me. Thanks again.
Compaqguy200
0
Response Number 5
Name: compaqguy200 Date: March 2, 2004 at 06:59:19 Pacific
Reply:
I was able to get the web page to come up but those are a little different than my model which is a 6285-56u. Is there another site I could go to for the 6265 model...Thanks
Compaqguy200
0
Response Number 6
Name: chrisman7 (by chrisman.7) Date: March 2, 2004 at 09:04:53 Pacific
Reply:
here is the page for the manual for your pc you need a pdf reader i couldn't acess it you might have better luck
Summary: Yeah, I don't think you need to take the cover off to remove the logic board. And I hope your working on that thing in some sort of clean room. Because if even the one little spec of dust gets inside ...
Summary: I am trying to remove the front cover ("bezel") from a Gateway computer as part of installing a drive. The user's manual instructs to "Position the computer where you can grasp the front bottom edge o...
Summary: I did forget something... I forgot to say that the other cap I pulled off was covering the CLRTC Pins... These pins are right next to the Case Intrusion Pins... My original question should have been: ...
0 
taper drive
