ram upgrade and no screen

Emachines / EMACHINES
January 6, 2009 at 14:49:48
Specs: Windows XP, 256 ddr pc3200
hi guys i have just upgraded my ram from 256 ddr pc3200 to 1 gb and it was working fine for about 10 minutes then i installed wireless modem and restarted the pc and screen sows no image and the pc makes 3 beebs, i have changed the rams around reseated them and still wouldnt start now i tried to start it up with old ram and still the same no screen and 3 beebs please helm me ...


See More: ram upgrade and no screen

Report •


#1
January 6, 2009 at 14:54:08
Did you try to boot without the "wireless modem?"

It's CHRISTmas, not Xmas
WinSimple Software


Report •

#2
January 6, 2009 at 15:01:54
did you have the machine unplugged while doing all this switching around??

larry


Report •

#3
January 6, 2009 at 15:32:56
http://bioscentral.com/

Check what the beep code means. It might be failed graphics.

Goin' Fishin' (Some day)


Report •

Related Solutions

#4
January 7, 2009 at 12:40:30
hi, yes i did turn computer off when i swapped rams around and the wireless hasnt been installed because i didnt finish the installation, now even the old ram doesnt work, and i checked about beepings it says its either ram or keyboard card but i cant find whats wrong ? please i am clueless thanks for any replies

Report •

#5
January 7, 2009 at 17:23:15
ok, it was off but, was it unpluged? could try clearing the cmos.
http://www.computercare.ca/forum/sh...

larry


Report •


Ask Question