Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Raid 5
Name: mhags Date: October 27, 2005 at 12:48:01 Pacific OS: Windows XP/2k/2k3 CPU/Ram: 2.9/ 2GB
Comment:
Is it possible for a drive to have a write error in a raid 5 setup, which makes a drive drop offline? The drive rebuilt fine after it dropped off. Want to know if this is common, and or should I replace the drive?
Name: wanderer Date: October 27, 2005 at 15:21:17 Pacific
Reply:
is this scsi or ide? software or hardware raid5?
Golly gee wilerkers everyone. Learn to Internet Search
0
Response Number 2
Name: oldfogey Date: October 28, 2005 at 05:39:19 Pacific
Reply:
I used to run a SCSI Raid stack on a Compaq server (back in the days when 5Gb was BIG), and I never saw this happen - and I assume (??) that things have got more reliable since then. If it had, I would have replaced the disc, and, having run all the tests I could get, held it as an off-line spare if it seemed OK.
Obviously it depends on how critical the system and data is.
0
Response Number 3
Name: wanderer Date: October 28, 2005 at 11:49:29 Pacific
Reply:
without knowing hardware vs software raid or scsi vs ide no good advice can be given
Golly gee wilerkers everyone. Learn to Internet Search
Summary: With RAID-5 a failed hard drive will not bring down the array. It will keep functioning normally - perhaps slower though. So you should have the same access to Windows and all data that you currently ...
Summary: Do most RAID 5 adapters that allow hot swap of drives build an array automatically? The reason I ask is because I have a Dell Poweredge 6450 server that is configured with a RAID 5 using three SCSI d...
Summary: It's been a while since I ran a Raid 5 stack, and that was on Novell, but here are a few thoughts - please check what i say though! 1. RAID discs have to be all the same size (or at least they will al...