| Computing.Net: Over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to sign up now, it's free! |
PSU's and beep codes
|
Original Message
|
Name: Clyde
Date: October 30, 2003 at 13:15:24 Pacific
Subject: PSU's and beep codes
OS: WinXPPro
CPU/Ram: 1.3Athlon/784meg
|
Comment: Just FYI. I picked up a brand new ECS K7VTA3 w/XP2000 chip for $75 yesterday from Fry's, I know, what a deal LOL. Anyway, installed mission essentials and attempted to POST. I managed to get something on screen so the vid card was good and it powered up but I had a continuous beeping. After searching for Beep Codes I found was Vid Card or PSU. I swapped vid cards, same thing. Swapped PSU's and nothing (that one must have been bad) so I switched back to the original I started with and sure enough, it wasn't seated properly on the MOBO. Make sure you check your connections throughly is the lesson. Clyde
Report Offensive Message For Removal
|
Post Locked
This post is quite old and has been locked from receiving new replies. Please create a new posting instead.
Go to General Hardware Forum Home
