PCI Card Only Works in 1 Slot
|
Original Message
|
Name: Gnosis18
Date: November 4, 2007 at 15:35:21 Pacific
Subject: PCI Card Only Works in 1 SlotOS: XP ProCPU/Ram: Core 2 Duo 2.0GHz; 2 GB RModel/Manufacturer: Me |
Comment: When I plug this wifi card into the tower's PCI slot, it will only work on the bottom slot. Other cards work in the other slots. Is this an IRQ problem? I didn't think XP had those often. What else could be causing this?
Report Offensive Message For Removal
|
|
Response Number 1
|
Name: OtheHill
Date: November 4, 2007 at 15:44:37 Pacific
|
Reply: (edit)The BIOS could be set to manually configure the PCI slots and the IRQ resources. It may not be readily documented but PCI slots usually have a default IRQ assigned to them. Some slots share. Read the documentation for the card and see if it requires certain resources. Also, some MBoards will allow disabling some PCI slots to release the IRQ assignment. This doesn't appear to be your issue.
Report Offensive Follow Up For Removal
|
|
Response Number 2
|
Name: Gnosis18
Date: November 4, 2007 at 15:50:45 Pacific
|
Reply: (edit)I should also note that I had an identical mobo that I switched out because of an unrelated issue. Same make/model and all. This card worked on that mobo in the first slot but would not work in the corresponding slot on the new board. This is another factor that threw me. Thanks for your responses!
Report Offensive Follow Up For Removal
|
Use following form to reply to current message: