PC CHIPS 810 no sound
|
Original Message
|
Name: Frank
Date: August 9, 2003 at 15:53:56 Pacific
Subject: PC CHIPS 810 no sound OS: windows meCPU/Ram: AMD1700+ XP/512 |
Comment: I reacently installed a PC CHIPS 810 board into a friends machine that used to have an amd k6-2/400 in it don't have model of board as it didn't have one on it. I ran regedit then deleted the floder in the registery called enum to remove all old hardware then once I got into windwos with the 810 I ran add new hardware once it had finnished restarted and gone back into windows I ran the 810 motherboard driver cd ver 8.12B it installed everthing but the on board sound will not work it is listed under device manager and it says that the device is installed and working properly but if I go into sound and multimedia properties under audio it says no playback device avalibal what can I do to get it to work?
Report Offensive Message For Removal
|
|
Response Number 1
|
Name: darksea
Date: August 9, 2003 at 16:29:33 Pacific
Subject: PC CHIPS 810 no sound |
Reply: (edit)Hi, Check in Bios and make sure onboard sound is enabled. I think it is listed as AC97.
-T-
 Report Offensive Follow Up For Removal
|
|
Response Number 2
|
Name: Frank
Date: August 9, 2003 at 17:35:11 Pacific
Subject: PC CHIPS 810 no sound |
Reply: (edit)It's turned on in the bios and is listed under system properties and says it is working properly but in control pannel under sounds and multimedia under audio it says no playback device avalibal and no record device avalibal it has all drivers installed and is switched on in the bios. Any ideas?
Report Offensive Follow Up For Removal
|
|
Response Number 3
|
Name: darksea
Date: August 9, 2003 at 17:47:51 Pacific
Subject: PC CHIPS 810 no sound |
Reply: (edit)Check in device manager and see what you have listed under sound,video,and game controllers.
Report Offensive Follow Up For Removal
|
|
Response Number 5
|
Name: Frank
Date: August 10, 2003 at 07:05:39 Pacific
Subject: PC CHIPS 810 no sound |
Reply: (edit)In device manager under sound,video,and game controllers it says SiS7018 if you click on it it says this device is working properly. But under sounds and multimedia properties under audio where it says sound play back preferred device it has nothing listed just a blank space all I can select is game compatible device or voice modem wave #00 line even though it is installed under system properties. All multimedia conponents are installed under add/remove programes/windows setup
Report Offensive Follow Up For Removal
|
|
Response Number 6
|
Name: darksea
Date: August 10, 2003 at 08:02:36 Pacific
Subject: PC CHIPS 810 no sound |
Reply: (edit)I also have the SiS7018 but under preferred playback device it lists Sis7018 wave. The only thing I can suggest is that you reinstall the SiS7018 driver. You can use the driver off your installation disk or find a better one here. http://radel.inet.nz/m810lmr.html
-T-
Report Offensive Follow Up For Removal
|
|
Response Number 7
|
Name: Frank w
Date: August 16, 2003 at 10:45:18 Pacific
Subject: PC CHIPS 810 no sound
|
Reply: (edit)I tried reinstalling the driver but no joy.
this problem seems to happen to a lot of machines after you change the motherboard. everything insatlls and works apart from the sound it gets listed as working properly in device manager but under multimedia proprties it says no playback device avalibal. It's stange as creative sound chips seem to work ok when you change a motherboard over but SiS7018 or AC97 as they are also known never seem to work unless you format and reload windows. Surely there is a way aruond this problem or am I doomed to reloading windwos?
Report Offensive Follow Up For Removal
|
Use following form to reply to current message:
