Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Packard Bell 950 tower case removal
Name: Bracketman Date: November 16, 2003 at 12:55:32 Pacific OS: Win98SE CPU/Ram: P1 64
Comment:
How do I remove the case from a Packard Bell 950 tower? There are no screws on the plastic case or bottom. There are four screws in the rear which appear to hold the CPU cooling fan in place. There is a footing on the bottom front, but it doesn't have any screws visible? How do I remove the case? Thank you.
Name: OtheHill Date: November 16, 2003 at 13:01:20 Pacific
Reply:
Look for screws or some release mechanisms in the upper and lower rear corners of the side panels. You should have to depress them and slide the panel to the rear at the same time. Once you slide back an inch or so, you should be able to lilt and lift the panel.
0
Response Number 2
Name: Bracketman Date: November 16, 2003 at 13:35:39 Pacific
Reply:
Thanks, Othehill,
As it turns out you pop the plastic footing with a screw driver, then pop off the plastic front cover too, to reveal the screws which hold the plastic side panels onto the metal case. Thanks for your help.
0
Response Number 3
Name: OtheHill Date: November 16, 2003 at 14:18:51 Pacific
Summary: This is actually a reply to a old, closed thread, in case it might still be useful: I have a Packard-Bell SK-2300H keyboard (which has a row of (10 + 2) additional keys along the top. I, too, tried ha...
Summary: Hi, A friend gave me his Packard Bell which needs some fixing but there is no XP CD. It's one of those systems that have partitioned the HD into C: (Slave-User Data) and D: (OS Partition). When it boo...
Summary: hi, i have a packard bell and the power pin has snapped, it has happened to me before on another laptop and on that one i just bought a dock that would charge the battery. Is there a dock for the Pack...
0 
Make zip drive portable?
